Call for an instant quote: (800) 555-3694

Call for an instant quote: (800) 555-3694

Nortek Round Copper Post Cap Installation

AZEK products must be painted prior to being installed, or they will discolor and void the warranty. AZEK does not have a finish, and that leaves the material subject to dirt, smudges, mold, and mildew. The following is recommended:

  1. No holes or tacks are included with the Sedona or Tiara copper caps. We recommend using a good exterior adhesive when your copper caps have been fitted, and you are ready to install them.
  2. A small amount of caulk can be added to fill any gaps between the post and post cap.

Measurement Tips

To Measure for Post Caps, be sure to measure all your deck or dock posts to achieve a nice fit. Take the widest diameter across the top of your deck or dock post.

Caps are made in 1/4″ increments; if your measurement falls in between sizes, it is up to you if you want to round up or down the quarter inch.

For a snugger fit when rounding down, you may need to remove a small amount of material from your post either by sanding or grinding with an angle head grinder and a rough grit of sandpaper (60) grit.

If you round up on the size, your caps may be a little loose which can be cured with sizing tape.

Tiara Round Natural Copper Post Cap